SELECTION FOCUS
Questions that change the direction.
- Full model or controlled short-code drawing
- Corner/centre-hole geometry
- Loading face and pocket population
Cutting-insert carrier · Epoxy & Resin Carriers
T-Style Triangular Insert Lapping Carriers
Carrier directions for triangular ISO-style inserts and drawing-controlled T22, T16 and T11 workpiece groups.
HOW THIS PRODUCT IS JUDGED
Connect the physical product to its process function.
A short shop code is not enough to define the pocket. The three corners, centre hole, face features and actual outline are checked before layout and gearing.PRODUCT IDENTITY & CONFIGURATION
NWS-PLC-INS-T
PLC = polymer carrier; INS = cutting insert; T = 60-degree triangular workpiece familyShort codes are not presented as ISO insert designations unless the full designation is supplied.T22T16T11
- Workpiece familyconfirmed
- Triangular inserts or customer-defined triangular blanks
- Identity checkverify
- Short codes T22 / T16 / T11 are internal references until matched to a drawing
- Corner reliefverify
- Three corners and any central hole are measured from the actual part
- Carrier thicknessverify
- Set below the workpiece/process stack only after trial and drawing review
- 01Confirm the insert drawing, physical sample and the ISO designation independently.
- 02Derive the carrier pocket from the controlled insert outline; clearance is a project variable, not a fixed catalogue value.
- 03Add the external tooth form only after machine plate, sun gear and ring gear data are checked.
- 04Set carrier thickness from the workpiece and process stack, then release a first-article drawing for approval.
RFQ & DRAWING FIELDS
Evidence needed before release.
- Part drawing or physical sample
- Carrier layout and bridge check
- Machine interface and tooth data
- Material, thickness and inspection
PRODUCT REFERENCE
Confirm the configuration for your part.
Triangular parts loaded in the carrier, one-part macro, centre-hole/edge detail, carrier side view and tooth inspection.Do not submit confidential customer drawings until a secure project channel is confirmed.PUBLIC CLAIM BOUNDARY
Typical direction is not a performance guarantee.
Dimensions, materials, removal rate, roughness, life and compatibility are published only when supported by an approved drawing, material record or project-specific validation. Unverified label examples, third-party photographs and customer pricing remain internal references.
APPLICATION ROUTES
Where this product may enter the process.
ENGINEERING KNOWLEDGE
Read before selecting the specification.
RELATED TYPES IN EPOXY & RESIN CARRIERS
Compare neighbouring constructions.
Laminate carrierG10 / FR4 Laminate CarriersMachined laminate carrier directions for protected contact and economical process development where their stiffness and chemistry fit.Engineering polymerPEEK, PI, PPS & PEI Carrier DirectionsEngineering-polymer carrier directions screened around temperature, chemistry, stiffness, wear and workpiece contact.Polymer carrierPOM, PA, PVC & Cast-Polymer CarriersApplication-led polymer workholding for contact-sensitive parts and defined chemical environments.Cutting-insert carrierC-Style Insert Lapping CarriersDrawing-controlled epoxy or laminate carriers for CNMG, CCMT and related 80-degree rhombic insert families.
DRAWING · SAMPLE · PROCESS EVIDENCE