SELECTION FOCUS
Questions that change the direction.
- Full insert designation and maker
- 55-degree tip protection
- Positive/negative insert geometry and face
Cutting-insert carrier · Epoxy & Resin Carriers
D-Style Insert Lapping Carriers
Drawing-controlled carriers for DNMG, DCMT and related 55-degree rhombic insert families.
HOW THIS PRODUCT IS JUDGED
Connect the physical product to its process function.
Acute insert corners, pocket relief and loading direction are reviewed with the carrier bridges and machine path before the external teeth are released.PRODUCT IDENTITY & CONFIGURATION
NWS-PLC-INS-D
PLC = polymer carrier; INS = cutting insert; D = 55-degree rhombic workpiece familySuffixes such as -PM describe the insert maker's geometry or application; they do not replace the carrier drawing.DNMG150608DCMT11T308DCMT070204
- Workpiece familyconfirmed
- D-style 55° rhombic indexable inserts
- Nominal size referencesreference
- 07 / 11 / 15 families; thickness code T3 must be decoded, not read as 3.0 mm
- Tip protectionverify
- Pocket radii and loading route reviewed to avoid point contact at the acute corners
- External gearingverify
- Generated from the actual lapping machine interface, never from the insert model
- 01Confirm the insert drawing, physical sample and the ISO designation independently.
- 02Derive the carrier pocket from the controlled insert outline; clearance is a project variable, not a fixed catalogue value.
- 03Add the external tooth form only after machine plate, sun gear and ring gear data are checked.
- 04Set carrier thickness from the workpiece and process stack, then release a first-article drawing for approval.
RFQ & DRAWING FIELDS
Evidence needed before release.
- Insert drawing or measured sample
- Machine OD, gear and plate data
- Pocket map and relief geometry
- Carrier material, thickness and flatness
PRODUCT REFERENCE
Confirm the configuration for your part.
Loaded and empty carrier views, acute-corner pocket macro, side profile, external tooth measurement and first-article inspection.Do not submit confidential customer drawings until a secure project channel is confirmed.PUBLIC CLAIM BOUNDARY
Typical direction is not a performance guarantee.
Dimensions, materials, removal rate, roughness, life and compatibility are published only when supported by an approved drawing, material record or project-specific validation. Unverified label examples, third-party photographs and customer pricing remain internal references.
APPLICATION ROUTES
Where this product may enter the process.
ENGINEERING KNOWLEDGE
Read before selecting the specification.
RELATED TYPES IN EPOXY & RESIN CARRIERS
Compare neighbouring constructions.
Laminate carrierG10 / FR4 Laminate CarriersMachined laminate carrier directions for protected contact and economical process development where their stiffness and chemistry fit.Engineering polymerPEEK, PI, PPS & PEI Carrier DirectionsEngineering-polymer carrier directions screened around temperature, chemistry, stiffness, wear and workpiece contact.Polymer carrierPOM, PA, PVC & Cast-Polymer CarriersApplication-led polymer workholding for contact-sensitive parts and defined chemical environments.Cutting-insert carrierC-Style Insert Lapping CarriersDrawing-controlled epoxy or laminate carriers for CNMG, CCMT and related 80-degree rhombic insert families.
DRAWING · SAMPLE · PROCESS EVIDENCE