SELECTION FOCUS
Questions that change the direction.
- Square insert family and complete suffix
- Face/chipbreaker orientation
- Corner radius and centre-hole features
Cutting-insert carrier · Epoxy & Resin Carriers
S-Style Square Insert Lapping Carriers
Carrier layouts for SPGX, SCGX, SNMA and customer-defined square insert blanks.
HOW THIS PRODUCT IS JUDGED
Connect the physical product to its process function.
Square workpieces can use different face features and corner preparations, so the pocket orientation and bridge strength are established from the actual part rather than the first letter alone.PRODUCT IDENTITY & CONFIGURATION
NWS-PLC-INS-S
PLC = polymer carrier; INS = cutting insert; S = square workpiece familyThe source table contains both ISO-style names and internal short codes; the page keeps those two identity systems separate.SPGX1504SCGX120408SNMA120412S15S11S09S06
- Workpiece familyconfirmed
- Square indexable inserts and customer-defined square blanks
- Orientationverify
- Corner direction, insert face and any chipbreaker projection must be marked on the loading drawing
- Bridge strengthverify
- Pocket count, spacing and carrier thickness checked together
- Model boundaryverify
- Maker suffixes and non-ISO shop codes require a drawing or sample
- 01Confirm the insert drawing, physical sample and the ISO designation independently.
- 02Derive the carrier pocket from the controlled insert outline; clearance is a project variable, not a fixed catalogue value.
- 03Add the external tooth form only after machine plate, sun gear and ring gear data are checked.
- 04Set carrier thickness from the workpiece and process stack, then release a first-article drawing for approval.
RFQ & DRAWING FIELDS
Evidence needed before release.
- 2D outline or sample measurement
- Pocket count and balanced layout
- Machine-specific tooth profile
- Thickness, flatness and edge acceptance
PRODUCT REFERENCE
Confirm the configuration for your part.
Complete square-insert carrier, parts loaded in the approved orientation, pocket/bridge macro and external tooth inspection.Do not submit confidential customer drawings until a secure project channel is confirmed.PUBLIC CLAIM BOUNDARY
Typical direction is not a performance guarantee.
Dimensions, materials, removal rate, roughness, life and compatibility are published only when supported by an approved drawing, material record or project-specific validation. Unverified label examples, third-party photographs and customer pricing remain internal references.
APPLICATION ROUTES
Where this product may enter the process.
ENGINEERING KNOWLEDGE
Read before selecting the specification.
RELATED TYPES IN EPOXY & RESIN CARRIERS
Compare neighbouring constructions.
Laminate carrierG10 / FR4 Laminate CarriersMachined laminate carrier directions for protected contact and economical process development where their stiffness and chemistry fit.Engineering polymerPEEK, PI, PPS & PEI Carrier DirectionsEngineering-polymer carrier directions screened around temperature, chemistry, stiffness, wear and workpiece contact.Polymer carrierPOM, PA, PVC & Cast-Polymer CarriersApplication-led polymer workholding for contact-sensitive parts and defined chemical environments.Cutting-insert carrierC-Style Insert Lapping CarriersDrawing-controlled epoxy or laminate carriers for CNMG, CCMT and related 80-degree rhombic insert families.
DRAWING · SAMPLE · PROCESS EVIDENCE